CP-132EL/EL-I
CP-132EL/EL-I
2-port RS-422/485 PCI Express boards with optional 2 KV isolation
* PCI Express x1 compliant
* 921.6 Kbps maximum baudrate for super fast data transmission
* 128-byte FIFO and on-chip S/W flow control
* Low profile form factor fits small-sized PCs
Drivers provided for Windows 7 x86/x64, XP/2003/Vista/2008 x86/
x64, 2000, Linux 2.4, Linux 2.6 (x86/x64), Windows XP Embedded,
SCO OpenServer 5/6, UnixWare 7
15 KV ESD protection on the board
SPECIFIKACIJA:
Hardware
Comm. Controller: 16C550C compatible
Bus: PCI Express x1
Connector: DB25 female
Serial Interface
Number of Ports: 2
Serial Standards: RS-422/485
Max. No. of Boards per PC: 4
Serial Line Protection
ESD Protection: 15 KV on the board
Optical Isolation: 2 KV (CP-132EL-I only)
Performance
Baudrate: 50 bps to 921.6 Kbps
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: XON/XOFF
Serial Signals
RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-2w: Data+(B), Data-(A), GND
Driver Support
Operating Systems: Windows 2000, Windows XP/2003/Vista/2008/7
x86/x64, Linux 2.4, Linux 2.6 x86/x64, QNX 6, Windows XP
Embedded, SCO OpenServer 5/6, UnixWare 7
Note: Please refer to Moxa’s website for the latest driver support information.
MODELI ZA NAROČILO:
CP-132EL-DB9M:
2-port RS-422/485 low profile PCI Express x1 serial board (includes DB9 male cable)
CP-132EL-I-DB9M:
2-port RS-422/485 low profile PCI Express x1 serial board with optical isolation (includes DB9 male cable)
